Blog & News
Blog >

APACS to Foxboro EVO

The Siemens Moore APACS and QUADLOG systems, initially introduced in 1992 will no longer have guaranteed vendor support as of Oct.1, 2020.  The APACS+ system combined the best of DCS and PLC functions into a combined platform. The system was built using the available standards providing the first open architecture for 3rd party extensions. Throughout the 90’s enhancements were added and the APACS+ system was recognized as a leading platform in the areas of Batch and Hybrid control, and integrated control with TUV safety certification. However, component obsolescence and advancing technology have overtaken this product family, and thus ensured its maturity. Hardware availability is declining, in particular the Processors and Communication Modules are increasingly difficult to find through 3rd party suppliers. Operating systems that support the engineering environment and specific server hardware are no longer offered or supported by Microsoft.

One particular advantage of implementing a migration effort with the APACS+ system has been the simplicity of the configuration and programming tools. This lends itself well to the conversion process when as building the logic. The 4 languages used in the 4-Mation software are directly relatable to most of the current systems including PLC ladder logic. It is not the intention of this document to detail the specific programing differences, however it is worth mentioning that the original intent of the APACS+ programmed logic is much easier to capture and document for the purposes of conversion.

APACS+ System Migration Considerations

Over the life span of the APACS+ system, there are various architectures that have been removed from production due to advancements and component availability. The initial system was released with the proprietary MBUS/MNET communications system based on the MAP protocol. This has been discontinued and most of the systems in operation today are now connected via Ethernet and the Industrial Ethernet module (IEM). This also means that the required backbone for communications, including fiber optic cables, may be re-purposed when the system is migrated. MS Windows XP (IEM OS) is the latest version that will support the MBI card required to connect to the APACS+ system and MS Windows 7 is the latest version that will support the engineering platform.  

At the time of this writing, there are currently no options available for a phased in approach to migrating the QUADLOG safety system. This would include “controller only” options. This is due to the additional system and I/O diagnostics inherent in the Quadlog safety system. There are however options available for retaining the I/O terminations and avoiding a complete re-wire.

I/O Density, Footprint and Channel Types
The APACS and Quadlog I/O modules are 16 and 32 channel cards. This channel density can potentially create and issue with the existing system footprint. Most of the current systems do not support the required channel density and will require additional module racks and I/O cards. Additionally, the APACS and QUADLOG I/O may be configured with a mix of Inputs and Outputs on the same I/O card. Some vendors have addressed this well with their approach to migration of mixed I/O types and density.

Migrating to the Foxboro EVO System

  • Controller Only solution – N/A, This is a complete system replacement including I/O modules.
  • Hybrid system capability – No, the APACS system will only communicate with a Foxboro system via the addition of an OPC server.
  • Connection to existing I/O terminations – Yes, the Foxboro I/O modules plug into the existing I/O slots and mirror the I/O configuration.
  • Connection to existing HMI – No, the current HMI would have to be replaced.

The Foxboro system, now owned by Schneider Electric, has developed form fit replacement modules for the APACS system. These modules are installed into the existing APACS racks without rewiring or changing the system footprint.

The APACS control modules are removed and the Foxboro controllers are mounted and connected to the existing APACS rack. The system conversion is performed offline and then moved to site where it is installed into the existing APACS control racks.

The Foxboro migration solution does not support the Moore Quadlog safety system. This may not be an issue as the Quadlog systems installed typically have the shutdown features disabled and they are essentially no different than the APACS system. This would however require a SIL review to determine the required level for the site and the current Quadlog system.

Figure 1 Foxboro EVO System I/O installed inAPACS Module Rack and connected to the Foxboro CPU.

Total control solutions group

We are your one-stop shop for Instrumentation, Controls and Electrical, from inception through to commissioning.  Our in-depth experience spans a variety of industries and vendors enabling us to provide the right solution for you.

About Us

More recent posts

Back to all blog posts

Committed to safety